Framing/ Exterior framing/ Framing for sliding glass openings
The S7 is an aluminium sliding window system with 65, 70 and 77 mm wide frames that resolve the issue of the juncture of the frames in the centre of the window with a 22 mm wide cross section. This has been achieved reducing the aluminium surface in the window and using a rectilinear design. This design creates minimum visual impact, especially desirable in french or balcony windows. The S7 system contains a range of multi-point locks that allow the windows to reach the maximum height of 2.7 m. The glass and the frames are connected with a double-faced adapter joint, which produces a secure and clean union.
Other technical characteristics of the product are:
—Glazing up to 32 mm thick.
—The roller bearings, tested for 15,000 cycles, resist up to 200 Kg per panel.
—With CTE- HS specified micro-ventilation openings.
—Class 3 air permeability.
—Class 7A water resistance.
—Class CE2100 wind force resistance.
—Up to 1.4 W/m²K thermal transmittance.
The S7 system’s central node cross section is only 22 mm wide.
A detail of the S7 system’s frame joints.
The double-faced adapter joint firmly connects the frame and the glazing.
A. 22 mm central node.
B. Double-faced adapter joint.
A. 34 mm polyamide pieces.
B. Wide range of frames
C. Up to 32 mm thick glazing.
All images are property of the company offering the product unless otherwise indicated.
Products may vary depending on the area of distribution.